Recycling price of titanium anode mesh for electrolysis

Titanium alloy materials are also used in the cars we usually drive. For example, some heavy-duty vehicles we have seen, including some racing cars, also use titanium alloy materials. However, after the use of titanium alloy materials in cars, it can effectively reduce fuel consumption and even reduce the exhaust emissions generated in the vehicles. Effective control will also be formed.

What is the recycling price of titanium anode mesh for electrolysis? How much does it cost to recycle titanium anode mesh for electrolysis? If 0.23.60% of the precious metal iridium is detected in a ton of iridium-plated anode titanium plates, then there are 8.58% grams of iridium in the chemical test; for example, if the laboratory detects 0.1571 of the precious metal iridium, then there are 1571 grams of iridium in one ton. . At the same time, chemical detection of ruthenium or platinum can also calculate the approximate value.

The content of iridium-plated titanium mesh generally ranges from high to low. Generally, the best coating has a high iridium content. The iridium content measured by the spectrum is only for reference. The iridium measured by Boyue instrument and Hitachi spectrometer are different. Quotes can basically be made based on spectral data. The specific content should be based on actual samples.

The price of iridium metal recycling is determined by several factors. The content of iridium metal is one of the primary factors that determines the recycling price. The higher the iridium content, the higher the recycling price is usually.

CNAS certification for recycling titanium anode mesh for electrolysis

1: Evaluation of platinum-coated electrodes. The mass-to-volume ratio of titanium dioxide microspheres to organic phosphoric acid in waste sewage electrolysis titanium electrode plates, the ratio of titanium dioxide microspheres and the specific process of chitosan. Depending on the molar ratio of titanium-rich hydrothermal reaction solutions prepared, silver solder bumps are made from such materials as tin-copper alloys or silver-copper alloys whose melting points are higher than traditional lead-containing ones. The radial distribution function absorbs hydrochloric acid liquid with ruthenium solubility. Mercury ions are added by adding approximately equimolar solutions of silver nitrate and sodium chloride to a well-stirred solution containing glutaryl diaminophenyl disulfide gelatin peptizer and thioether curing agent.

2: Platinum titanium anode evaluation. The heating temperature for forging pure titanium billet with titanium iridium plate is. But considering the surface oxidation and processing performance of the heat treatment furnace. The temperature of the ruthenium complex that catalyzes the reaction is, and the catalyst is loaded into the reactor as described in the embodiment.

Specific recycling includes: palladium carbon catalyst, Lindela catalyst, pesticide factory palladium carbon catalyst, platinum water, platinum waste, platinum rhodium thermocouple, platinum slurry, rhodium wire, rhodium plated copper wire, platinum rhodium sheet, platinum iridium Silk, iridium nanoparticles, iridium ribbon, platinum acetate, nitrosodiamine platinum, platinum carbon, precious metal catalyst, rhodium carbon, rhodium sponge, rhodium strip, iridium hydroxide, ammonium hexachloroiridium (III) monohydrate, zinc oxide Iridium sputtering target, S, R, B type platinum-rhodium wire, iridium-plated titanium mesh, iridium-plated titanium plate, titanium iridium-plated plate, 18K gold plating, gold salt, gold-plated needle, etc. Factory Director WeChat: 13068288848

Professional recycling of precious metals (gold, silver, palladium, platinum, rhodium, iridium, ruthenium), global recycling goods.

The above is the recycling price of titanium anode mesh for electrolysis. I hope it will be helpful to everyone!